I've been pouring over the boards but I do not see this documented. I need to get calls that come in to our Business office ACD to rollover to the operator (ext 0) after about 30 seconds. I see where it has this option in call treatment but it is not rolling at all. Thanks for your help in advance!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SECC4 Routing calls to another ext after no answer 1
- Thread starter MrYotsuya
- Start date
-
1
- #2
I take it you have a Symposium Express?
The option you have with Call Treatment is to roll over to another Skillset after the specified number of seconds. In order to get it to work you have to specify the Overflow Skillset in your Call Routing (Priority with an arrow).
However, you want to overflow to an extension? - Try experimenting with Second Overflow Treatment - activate it via On/Off set the 30 seconds and choose "Route calls to this number" set 0.
Second Overflow is ment to be used when you have a special busy day, but you can use it permanently. Remember that it will affect ALL Skillsets, which use the Treatment.
The option you have with Call Treatment is to roll over to another Skillset after the specified number of seconds. In order to get it to work you have to specify the Overflow Skillset in your Call Routing (Priority with an arrow).
However, you want to overflow to an extension? - Try experimenting with Second Overflow Treatment - activate it via On/Off set the 30 seconds and choose "Route calls to this number" set 0.
Second Overflow is ment to be used when you have a special busy day, but you can use it permanently. Remember that it will affect ALL Skillsets, which use the Treatment.
- Status
Similar threads
- Locked
- Question
- Question
- Locked
- Question