Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SECC call priority - what is the difference when it has an arrow ??
- Thread starter newbie863
- Start date
From the NTP:
You have a choice of routing a call to one of six priorities. Three are high priority and three are low priority (overflow). The high priorities are denoted as 1, 2, and 3. 1 is the highest priority. The low priorities are denoted as 1, 2, and 3 with arrows next to them. You must have at least one high-priority skillset for each CLID, DNIS, and CDN. You can view only one
routing type (CLID, DNIS, or CDN) in the list at a time.
You have a choice of routing a call to one of six priorities. Three are high priority and three are low priority (overflow). The high priorities are denoted as 1, 2, and 3. 1 is the highest priority. The low priorities are denoted as 1, 2, and 3 with arrows next to them. You must have at least one high-priority skillset for each CLID, DNIS, and CDN. You can view only one
routing type (CLID, DNIS, or CDN) in the list at a time.
- Thread starter
- #3
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question