Recently upgraded my server MB,CPU,Ram.... First boot gave me disc read errors/error loading os "expected that" so i unplugged all drives except primary master "Maxtor 120 gig", and secondary slave "CD-ROM, Liteon CD-RW" Reinstalled windows "XP Pro" and plugged other 2 HD's in. "Maxtor 120 gig and Seagate 120 gig" both drives were recognized in device manager, however when trying to access the maxtor, it would pop up a "Cannot locate install.exe which is needed to access files of this type" I could still access it on the network from other pc's. When trying to access the Seagate drive it simply stated the drive was not formatted. Assuming the maxtors drive problem had something to do with dynamic drive overlay, i went ahead and did all my windows updates and it started working fine. The seagate still shows to not be formatted. Both drives were working fine that day before i upgraded and reinstalled windows. Not jolts or shocks to the pc during this time. I was also grounded while working on the pc. Any ideas???
(tried to access the drive with seatools and it says the drive is fine...dont recall if i had the drive set as dynamic before upgrading, but now i dont have the option to change it)
TIA,
linkc
(tried to access the drive with seatools and it says the drive is fine...dont recall if i had the drive set as dynamic before upgrading, but now i dont have the option to change it)
TIA,
linkc