SDL2110 REASON 1

[bzakk]

I am having trouble bringing up a new IPE. This IPE is a Fiber remote that is working off of an existing multi-IPE fiber box. The download will start but it will fail with a SDL2110 Reason 1. I have changed out 2 controller cards and 2 network cards. I know the fiber is good because there is existing equipment on it today. I am thinking about changing out the card cage. Any Ideas?????

 

[phonz1]

check that you have used the correct cables, from the superloop card to the fiber box, and then on the other end from the fiber box to the controller

 

[bzakk]

I have the correct cables but maybe there is a bad one. I will replace all of them tonight and see what happens.

 

[phonz1]

I can't remember the exact part numbers, but 1 cable is the near end and the other is the far, if you have them wrong, it won't come up... and, all 4 cables are white, so it'd hard to tell them apart.. good luck!