Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SDL2110 REASON 1

Status
Not open for further replies.

bzakk

MIS
Oct 10, 2007
18
US
I am having trouble bringing up a new IPE. This IPE is a Fiber remote that is working off of an existing multi-IPE fiber box. The download will start but it will fail with a SDL2110 Reason 1. I have changed out 2 controller cards and 2 network cards. I know the fiber is good because there is existing equipment on it today. I am thinking about changing out the card cage. Any Ideas?????
 
check that you have used the correct cables, from the superloop card to the fiber box, and then on the other end from the fiber box to the controller
 
I have the correct cables but maybe there is a bad one. I will replace all of them tonight and see what happens.
 
I can't remember the exact part numbers, but 1 cable is the near end and the other is the far, if you have them wrong, it won't come up... and, all 4 cables are white, so it'd hard to tell them apart.. good luck!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top