Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SD Card Warning 1

Status
Not open for further replies.

BrianCosta

Systems Engineer
Oct 25, 2018
376
JO
Hi ...

I have IPO500v2, SSA find the below warning:

Screenshot_2023-11-20_094400_mn87ke.jpg


Error_gqj1c9.png


I checked another system and found that the boot location is System Primary.

What does this mean and how I can resolve this?

thanks
 
Under alarms have you got any relating to the SD Card?

APSS/ACIS/ACSS-SME
not arrogant, just succinct.
 
@TomMills:

before this happened, the customer tried to change the user name, when saved, a cold restart occurred, but after that, we programmed again and there were no problems with this.

Thanks
 
Sometimes removing the SD and re seating it then rebooting the IP5090 will clear that.

Failing that, run the recreate SD card process.

APSS/ACIS/ACSS-SME
not arrogant, just succinct.
 
@TomMills: re-creating SD Card again cause all programming and configuration and Programming lost
 
only if you format first, but always have a backup of the .cfg file regardless.

APSS/ACIS/ACSS-SME
not arrogant, just succinct.
 
At R11.1 you may want to check your Manager settings. 'Backup on send' is not checked by default. I have been saved too many times to count by having a current backup available.

Dermis and feline can be divorced by manifold methods.*
*(Disclaimer for all advise given)--'Version Dependent'
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top