smellydoberman
Technical User
Here's the situation:
1. A Maxtor Atlas 10K IV, Ultra 320, 36.7GB SCSI HDD with an 80 pin SCA-2 connector. Drive model #8B036JO.
2. An LSI Logic LSI20320-R controller with the usual HD68 internal connector.
3. The connector adapter (part number SM-071) on this page: It can be seen a little ways down that page, the first item under the section called "SCA Adapters (SCA-80)".
Here are my questions:
1. Will that adapter allow the drive to be used with that controller?
2. How will the drive be getting the 5 and 12 volts it needs to power up? There's only one thing to plug into on that drive, and that's the 80 pin SCA-2. There is no power connector.
Thank you.
Homebrew P4-3.0P; Intel D865GBF M/B;
512 Crucial DDR400; Sony DVD R/W; (1) Maxtor 160 SATA, WD Raptor 74G SATA, WD Caviar SE 200G, WD 80G EIDE & Maxtor 60G EIDE HDD's in CRU Dataport VI+ pull out drawers; Supermicro SC-750A Full Tower; PC Power & Cooling Turbo-Cool 425 Power Supply; (1) 92mm and (1) 120mm front intake fans; (1) 92mm fan rear exhau
1. A Maxtor Atlas 10K IV, Ultra 320, 36.7GB SCSI HDD with an 80 pin SCA-2 connector. Drive model #8B036JO.
2. An LSI Logic LSI20320-R controller with the usual HD68 internal connector.
3. The connector adapter (part number SM-071) on this page: It can be seen a little ways down that page, the first item under the section called "SCA Adapters (SCA-80)".
Here are my questions:
1. Will that adapter allow the drive to be used with that controller?
2. How will the drive be getting the 5 and 12 volts it needs to power up? There's only one thing to plug into on that drive, and that's the 80 pin SCA-2. There is no power connector.
Thank you.
Homebrew P4-3.0P; Intel D865GBF M/B;
512 Crucial DDR400; Sony DVD R/W; (1) Maxtor 160 SATA, WD Raptor 74G SATA, WD Caviar SE 200G, WD 80G EIDE & Maxtor 60G EIDE HDD's in CRU Dataport VI+ pull out drawers; Supermicro SC-750A Full Tower; PC Power & Cooling Turbo-Cool 425 Power Supply; (1) 92mm and (1) 120mm front intake fans; (1) 92mm fan rear exhau