mandoman88
Technical User
On my computer at home, my mouse wheel is set to zoom in and out, but on my computer at work it's set to simply scroll up and down. How do I change the settings to make the wheel zoom in and out?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Scroll Wheel Settings
- Thread starter mandoman88
- Start date
- Status
TCARPENTER
Programmer
Hi mandoman88,
There's lots of things that can cause this, instead of me listing them, try this link: Autodesk Discussion Forum
HTH
Todd
There's lots of things that can cause this, instead of me listing them, try this link: Autodesk Discussion Forum
HTH
Todd
kpetursson
Programmer
check the "mbuttonpan" setting
mine is 1
you could lookup in the autoCAD help for more info.
This has fixed it for me in the past.
Hope this helps.
Kevin Petursson
mine is 1
you could lookup in the autoCAD help for more info.
This has fixed it for me in the past.
Hope this helps.
Kevin Petursson
Tightpants
Technical User
If the mbuttonpan setting does not work and you are using Microsoft Intellipoint software try using the wheel troubleshooter to correct the problem.
I recommend a five button Microsoft Mouse for AutoCAD. Assign Esc and the snap menu to the spare two buttons.
I recommend a five button Microsoft Mouse for AutoCAD. Assign Esc and the snap menu to the spare two buttons.
- Status
Similar threads
- Locked
- Question