Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Screen Display

Status
Not open for further replies.

lgamer

Technical User
Jun 5, 2003
2
0
0
US
My screen on the desk has about a 1/4 inch gap and part of my start button is missing. Any idea on how to solve thise issue.
 
Is this on a laptop or desktop? If its a desktop CRT tube monitor then you should be able to adjust it with the buttons on the monitor itself.

On a laptop its a little more tricky but look at your keyboard. It should allow you to adjust your monitor somewhere.
 
I have a Compaq Presario Desktop Model 7471 running Windows 98 SE.
 
sounds like the wrong monitor is setup on your system, or you need updated drivers for your graphics card.

check your monitor setting and make sure you don't have the default (laptop) setup if you're using a standard VGA, see if you can find the make and model under the (show all devices). the correct one should eliminate your problem
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top