Installed HD with existing data on it into a SCO 5.0.6 system, then initialized it. Then issued the mount command to mount it (mount /dev/oldhd /mnt). No errors on this command but a strange thing happens... /mnt disappears and I then cannot unmouunt the device. Is the HD fried maybe? Anyone got any suggestions? Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCO5.0.6 Mount problem
- Thread starter TomInMB
- Start date
- Status