Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SCN ONE CALL AT A TIME?

Status
Not open for further replies.

key4339

Programmer
Feb 23, 2015
4
US
I have two IP offices networked together have with 4 voice networking channels. if site A calls site B or vide versa and try to transfer back or push hold and select another intercom key and try another call the call will not go. its like I don't have enough VCM channel but there sitting there idle. when i'm monitoring the channel it doesn't even go off hook any ideas?
 
Replicate it with Monitor running and I bet it will give you a clue as to why the call won't go through.
 
Firewall with ALG turned on between the two location ??

It's only dialtone!!!
 
Could something silly as SCN Trunk channel set to 1 on outbound?
(Or config setup is making calls tromboning, consuming all channels)

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam

2cnvimggcac8ua2fg.jpg
 
This has normally been a ALG issue when i have seen it.

Kevin Wing
ACSS Small and Medium Enterprise (SME) Communications
ACS- Implement IP Office
ACA- Implement IP Office
Vive Communications
 
Indeed, Cisco routers were renowned for causing this at one point :)

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top