We are experiencing some issues with a small 5 office scn that we have setup. This is an established scn thats been working without issue and currently works 95% of the time. We recetly transitioned the internet circuit at all the locations and have noticed that when the data connection drops at an office for any reason there is a high probability that scn node will not sync back up correctly.
I have checked all settings and everything appears fine, the traffic goes through and there are no networking issues between the sites that can be seen. The only resolution that I have found is to reboot the netscreen firewall we have at that location. Ususally after a reboot the scn will sync up and everything will be working again.
Does anyone have any ideas why this would be happening and if there is any fix for this.
thanks
john
I have checked all settings and everything appears fine, the traffic goes through and there are no networking issues between the sites that can be seen. The only resolution that I have found is to reboot the netscreen firewall we have at that location. Ususally after a reboot the scn will sync up and everything will be working again.
Does anyone have any ideas why this would be happening and if there is any fix for this.
thanks
john