Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCN Bandwidth Requirement
- Thread starter itsmyjob
- Start date
hairlessupportmonkey
IS-IT--Management
bit of an open question.
whats your intentions? what do you have to work with? Is this LAN or WAN based connectivity?
ACSS - SME
General Geek
whats your intentions? what do you have to work with? Is this LAN or WAN based connectivity?
ACSS - SME
General Geek
mattKnight
Programmer
>What is the recomended bandwidth requirement for networking 500v2 systems together
Depends to so many factors.
personally I work on 100Kbps per call as a rule of thumb. However, bandwidth is important, but not the only metric to be concerned about; latency is important, jitter is even more so and packet loss is crucial.
Much much more information is needed from you before anyone can offer any advice beyond the very very generic (as HSM has already said)
Take Care
Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
Depends to so many factors.
personally I work on 100Kbps per call as a rule of thumb. However, bandwidth is important, but not the only metric to be concerned about; latency is important, jitter is even more so and packet loss is crucial.
Much much more information is needed from you before anyone can offer any advice beyond the very very generic (as HSM has already said)
Take Care
Matt
I have always wished that my computer would be as easy to use as my telephone.
My wish has come true. I no longer know how to use my telephone.
Greybeard191
Technical User
100K per call would allow you to use most codecs (G711 for example), so call quality should be good. But as Matt Knight said, there's other issues... there should be testing for Qos, and you need to make sure there's proper vlans in place if the wan link is shared for other purposes.
GB
GB
- Status
