Scenario: I’m sitting at home and

[whatUsay]

Scenario:
I’m sitting at home and launch netmeeting I type in my IP ( assigned through NAT on my PIX 515e ) and connect to my desk at work. Hey! everything works and the paychecks keep comming !

Question:
How do I setup the nat to be seen on the public side so I can connect to my desk. There are going to be about 20 people here with this setup eventually. Do I have to use PAT ?

Thanks for the help

 

[yizhar]

HI.

This seems like a bad idea.

If you can connect using netmeeting to your desktop at work, then probably several other milions can also.
Maybe one of those milions will break in?

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[Jimmbo]

However, if you really want to do this you have to use the conduit command to allow inbound access (or access-list entry if you use that instead of conduits) and a static-command binding an public Ip-adress to the incoming traffic.

But, you dont want to do this.

Regards Jimmy