sbo rls3

[handsbogan]

anyone help on how a SBO should be programmed for VNR

pstn is on the sbo how can i route pstn number to main office

any tips would be great
thanks i advance

 

[GHTROUT]

Looks like a great question - very little valuable info in the IO books...I'll reply to bring the thread back to the top




[highlight #CCFFFF]

http://www.GHTROUT.com

[/highlight]
[highlight #CCFFFF]

http://www.GHTROUT.com

[/highlight]
[small]faq798-6217 faq798-6218 faq798-6219 faq798-6246 faq798-6297 faq798-6371 faq798-6453 faq798-6477[/small]

 

[telecomnorth]

In CDB (load 15) VNR numbers are pointed to a RLB (ld 86) which in turn can route PSTN calls to the main office.

 

[biv343]

From my understanding, VNR only works for CDP numbers. Kind of a shortcut way to avoid having to build DSCs for remote sites - any unknown CDP number can get sent via VNR to the virtual trunks, and the NRS will then route it to the appropriate site.

For PSTN calls, you'd need to IDC them to a DSC to make them work, or use some type of DMI to convert the call type to CDP.