Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SBC is asking If Definity G3I V6 is ISDN class II

Status
Not open for further replies.

queenie2

Technical User
Aug 27, 2003
29
0
0
US
your PBX needs to be ISDN Class II
 
Are they asking for the protocol version to be changed? Because of the type of central office this field may need to be changed.

DS1 CIRCUIT PACK

Location: 02B19 Name: 46HC
Bit Rate: 1.544 Line Coding: b8zs
Line Compensation: 1 Framing Mode: esf
Signaling Mode: isdn-pri
Connect: network
TN-C7 Long Timers? n Country Protocol: 1
Interworking Message: PROGress Protocol Version: b
Interface Companding: mulaw CRC? n
Idle Code: 11111111
DCP/Analog Bearer Capability: 3.1kHz

T303 Timer(sec): 4


Slip Detection? n Near-end CSU Type: integrated

Echo Cancellation? n Block Progress Indicator? n
 
No this question was in addition to the protocol, this relates to whether I can receive the name or not.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top