Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Save To File

Status
Not open for further replies.

bo5i

Programmer
Jul 22, 2002
36
US
Hi, I have services configured to Save To File. Services are running successfully but i don't see any file getting saved in the said location. Whats missing in my setup ? Any ideas..

Thanks
 
sorry for the delay in responding. If you are using 7.5.x and saving the file across the network, make sure you do the following:
1)Make sure the Narrowcast service account has permission to write to the directory.
2)Map a drive from the NC server to the file location. Do not use terminal services to map this location. Either do it locally on the server or use PC ANywhere or some other remote tool that does not use virtual session.
3)Set up the device with the correct path to the file location.

Hope this helps.
PP
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top