SATA Problems RAID 0

[KingLeopold]

Hi all

I have a system with 2 SATA drives setup in RAID 0.

I have tried to install Roxio easy CD. However now my machine strats to boot up , it goes through the initial start and identifies the SATA drives and then starts to boot into Windows XP Pro SP 2, Then the machine just stops with a blank screen, There is still power there as a Ctrl Alt Del will resart the system but it still stops at the same point, ANy ideas how I can get windws to boot again without a fulll reinstall of windows?

Regards

Tony

 

[pweegar]

Uninstall Easy CD. You'll probably have to do it in safe mode. Then see if your pc will boot ok. I've had a similiar problem with the same software under Win2k. Removing it fixed the problem. Roxio software is the worst I have ever seen. Haven't used it since.