Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

SAN connection

Status
Not open for further replies.

amobasse

IS-IT--Management
Sep 10, 2002
19
0
0
US
Hi everyone,

I have a k-series running 10.20 trying to connect it to san switch. But for some reason they are not communicating.Any ideas would be appriciate it?

Thx
Allen
 
amobasse,

It may help if you posted hardware specifics for each piece of the connection (e.g. HBA, switch, storage unit).

What does "not communicating" exactly mean?

Does this configuration work for other servers, or is this your first run at getting things going?

Was this configuration (hardware pieces) recommended by a vendor or someone who already has it working in his/her environment?


Biker
Systems/Network Administrator
LiveFire Labs - Hands-On Technical e-Learning
 
Thanks for the response. The problem was in FC cables.
thx
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top