Oct 9, 2002 #1 amobasse IS-IT--Management Sep 10, 2002 19 US Hi everyone, I have a k-series running 10.20 trying to connect it to san switch. But for some reason they are not communicating.Any ideas would be appriciate it? Thx Allen
Hi everyone, I have a k-series running 10.20 trying to connect it to san switch. But for some reason they are not communicating.Any ideas would be appriciate it? Thx Allen
Oct 9, 2002 #2 biker1 MIS Sep 26, 2002 39 US amobasse, It may help if you posted hardware specifics for each piece of the connection (e.g. HBA, switch, storage unit). What does "not communicating" exactly mean? Does this configuration work for other servers, or is this your first run at getting things going? Was this configuration (hardware pieces) recommended by a vendor or someone who already has it working in his/her environment? Biker Systems/Network Administrator LiveFire Labs - Hands-On Technical e-Learning http://www.LiveFireLabs.com Upvote 0 Downvote
amobasse, It may help if you posted hardware specifics for each piece of the connection (e.g. HBA, switch, storage unit). What does "not communicating" exactly mean? Does this configuration work for other servers, or is this your first run at getting things going? Was this configuration (hardware pieces) recommended by a vendor or someone who already has it working in his/her environment? Biker Systems/Network Administrator LiveFire Labs - Hands-On Technical e-Learning http://www.LiveFireLabs.com
Oct 9, 2002 Thread starter #3 amobasse IS-IT--Management Sep 10, 2002 19 US Thanks for the response. The problem was in FC cables. thx Upvote 0 Downvote