Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Same subnet on each side of a VPN 1

Status
Not open for further replies.
tviman

tviman

Programmer
Jul 25, 2002
2,123
US
I have a very special situation that may require both sides of a VPN tunnel to have the same subnet. (192.168.1.xxx <- VPN Tunnel -> 192.168.1.xxx) Is this even possible?
 
Sort by date Sort by votes
Yes, this is possible. Use policy NAT so that:
192.168.1.xxx -> NAT -> 192.168.10.xxx <- VPN Tunnel -> 192.168.20.xxx -> NAT -> 192.168.1.xxx
 
Upvote 0 Downvote
Great! Thank you sooo much!!!! This will save a lot of heart ache!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

testman1
  • Locked
  • Question
SIP telephone ring on second call
Replies
0
Views
153
testman1
testman1
stanlyn
  • Locked
  • Question
HowTo Install Multiple PAP2T ATA Devices on Same Lan
Replies
3
Views
222
iggsterman
iggsterman
quazimotto
  • Locked
  • Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
87
quazimotto
quazimotto
NavinNet
  • Locked
  • Question
Why 2 different mac addresses of a server are being shown of CISCO 6509E Layer-3 Switch ?
Replies
0
Views
97
NavinNet
NavinNet
jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
212
jarod_paris
jarod_paris

Part and Inventory Search

Sponsor

Back
Top