Sacos

[rodelski]

Hi colleagues,

Could someone give me tip on how to end one extension which is not assigned when printed command exddp but (syedp:bpos=xx x xx xactive when syedp command printed. I don't knoe which parameter when sacos is applied, please help.

thanks in advance

rodelski

 

[aau2]

If you do sudip:dir=xxxx; what is the printout?

 

[rodelski]

this is what I'm getting when printing the following command.

<exddp:dir=3746;
NOT ACCEPTED
DIR
NOT ASSIGNED
<sudip:dir=3746;
NOT ACCEPTED
DIR=3746
DIRECTORY NUMBER(S) NOT ASSIGNED
<extee:dir=3746;
EXTEEIR=3746;
SURE? (YES/NO)
<y;
NOT ACCEPTED
DIR 3746
NOT ASSIGNED
<syedp:bpos=26-0-52;
SYSTEM EQUIPMENT DATA
EQU BOARDID TYPE DIR ROU/TRU
026-0-52-14 87 EL6 3746
END

 

[whosrdaddy]

ok, so this a data corruption.

start telling us with what softversion (CADAP) you have and maybe rfpui or patcher can help you out...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[rodelski]

hi, this is what I have

<cadap;
CALENDAR DATA
IDENTITY=UNMIK-HQ
VERSION=CXP1010001/5/BC11SP15/R5A
15:42:12
THU 08 MAR 2007
END

I'm planning to reload the Exchange(LALRL:lim=xx do you think this can help?
thanks again.

 

[whosrdaddy]

I doubt it, as the corruption is likely dumped to disk.
it is better to contact your local E/// supplier and have them to fix it...

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[rodelski]

Thanks for your prompt assistance anyway.

 

[rodelski]

Thanks to ME this prolem is solved.