Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

S87XX server question

Status
Not open for further replies.

ken07734

Programmer
Feb 6, 2002
625
US
Any tricks on how to reach the web page of the standby server via the active server other than an interchange to make the stanby active.


Thanks.
 
Each server should have it's own IP address, then there is an "active server" IP address. The idea is you just need to go to one IP address to reach which ever one is active, but can go to each individually if necessary.

I'm not sure what you meant by "via the active server". But, if you mean can you use your browser to get to the active server, then some how browse to the standy-by from there, then no you can't do that. You have to go directly to the stand-by's IP address.
 
There is no way that you could access the web interface of the Standby server via the Active server, it is because each server has different IP address. You could only do this on the root of the Active server by doing a telnet on the Standby server.

Cyrus
ACS
 
I am curious to see if anyone has figured out way to do it.
 
Don't you have hyperlinks to both servers at the top of the page?


Ronster

Science is the rehab of the masses.
 
Yep, You should have 1 Dynamic address for the S87xx and an ip address for each server, both active and standby.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top