Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
S87xx Interchange without Hardware duplication
- Thread starter TDMorIP
- Start date
The interchange is non service affecting
Main thing to remember is to ensure that the duplication link speed is set to auto-negotiation on both servers. The reason for this is on CM the NIC cards used for the software duplication should be 1Gb. The setup in the web interface does not allow for the 1Gb setting, therefore leave it at Auto negotiate.
Main thing to remember is to ensure that the duplication link speed is set to auto-negotiation on both servers. The reason for this is on CM the NIC cards used for the software duplication should be 1Gb. The setup in the web interface does not allow for the 1Gb setting, therefore leave it at Auto negotiate.
- Status
Similar threads
- Locked
- Question
- Locked
- Question