Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

s8730 CM5.0 Installation Problem

Status
Not open for further replies.

kokolatas

IS-IT--Management
Nov 19, 2007
162
GR
Hello Everybody.

I have a problem in the installation of Communication manager in a s8730 Server.

When i boot the machine with the CM5.0 CD-ROM inside, in order to install the software, in the step where i should press 'OK' to start the installation, i get a message which tells me that i should first reboot the server before the installation begins.
After the reboot when i step into the installation wizard, i get again the same message.

I haven't see that in the past and i can not find a solution in the avaya support site.

Do you have any idea what is that and why is happening?
And of course how can i solve that problem?

Thanks.
 
i didnt get that message bu i have seen that you cant have the flash card readers and modems connected .
 
I tried to do it with the flash card readers and modems not connected and it didn't work.

Anyway, i have take a screen shot of the message and I'll open a ticket in Avaya.
I'll let you know about their answer.

Thanks.
 
not sure of your problem but try this:

open telnet session. Type "unset crlf"

Then type: "open 192.11.13.6"

 
there is an issue due installion with the Hard Disk.
Please put a monitor and keyboard on the server during setup.
Press F2 to enable the Hard Disk and continue.

Kind Regards
Alex
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top