Okay, so I had a power outage this morning and gracefully shut down one of my 8500s. Once power was restored I had the onsite tech power it back up and now I have working telephones, access through ASA and access to Linux via telnet. I can not, however, get into the Web Maintenance Interface. From Linux I am showing no alarms and statapp shows everything up. Anybody got any ideas?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
S8500 Web Maintenance Interface down after shutdown/restart
- Thread starter vaoldschl
- Start date
phoneguy55
Programmer
maybe http didn't start. Not sure. Reboot it and see if that solves your issue.
- Thread starter
- #3
- Thread starter
- #5
But if I don't have root privileges at the CLI I can't run the 'stop' command can I? In reading the docs I see a 'reset system 4' will reboot Communication Manager but I'm not sure that will get http running. I have a very narrow maintenance window and physical access would take a plane ride so I'll keep looking and work with what I have for now unless somebody has another suggestion.
- Status
Similar threads
- Question
- Locked
- Question