Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

S8300 with no dialtone

Status
Not open for further replies.

AvayaTS

Vendor
Jun 25, 2007
8
NL
I've installed a S8300 with software R4.0.0

After some tests the dialtone doesnt works anymore.

Ive upgraded the G700 and the MGP but this didnt
work.

Does anyone know what I can do next.
 
When you do a "list media-gateway", does it show that the G700 is registered?
 
reset voip v0

show voip-parameters v0 and see if it is showing faulty
 
I already tried to reset the voip module.

I ve upgraded the voip and the mgp. but still no dial tone.
 
show ip route mgp and show ip route voip v0. Make sure your gateway is correct..
 
Ive checked the route mgp and voip. I think that the routes
are ok. Forgot to mention that only the dialtone doesnt work and everything else does work. SO if you dial someone
you wont hear the dialton but the other end will ring and if picked up the connection works. Both ends can hear each other.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top