s8300 meetme question?

[haiqi]

only 6 user most on conference meetme?

i setup by this way,

a vdn,
a vec,

but how can i restrict user join? how can i use password for every conference or user? as same as ip-office or conference bridge?

thanks!

 

[nohuhu]

haigi,

yes, meet-me conference now supports up to 6 parties, just like an ordinary conference. there were some rumors that this limit will be lifted in cm3, but i don't know exactly.

you can restrict user access to meet-me vdn using cors and conference access codes.

 

[haiqi]

thanks,

and how to use conference access codes?

 

[ChicagoPBX]

The password can be setup when you setup the vdn. On page 2 of the VDN you can enter the access code

VECTOR DIRECTORY NUMBER



MEET-ME CONFERENCE PARAMETERS:

Conference Access Code: *
Conference Controller:

 

[haiqi]

chicagoPBX,

i find

VECTOR DIRECTORY NUMBER



MEET-ME CONFERENCE PARAMETERS:

Conference Access Code: *
Conference Controller:

how to use it?
i set Conference Access Code: 123456

but i could join conference usually,no password need!

 

[ChicagoPBX]

you need to have a step in the vector that asks for the access code.
Look at steps 2 and 4.
CALL VECTOR

01 collect 6 digits after announcement 27401
02 goto step 6 if digits = meet-me-access
03 collect 6 digits after announcement 27402
04 goto step 6 if digits = meet-me-access
05 disconnect after announcement 27307
06 goto step 11 if meet-me-idle
07 goto step 14 if meet-me-full
08 announcement 27403
09 route-to meetme
10 stop
11 announcement 27309

change vector 42 Page 2 of 3
CALL VECTOR


12 route-to meetme
13 stop
14 disconnect after announcement 27404
15 stop
16