Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

S8300 - G350 one way communication path. 1

Status
Not open for further replies.

shandy11

Technical User
Dec 11, 2003
20
SG
Hi expert please assist.

I have a S8300-G700 (Site A)and a remote gateway G350 (Site B) with CM 3.

When I call from site A using IP Phones to TDM extensions, no problem. I have the trace like below
___________________________________________________________
19:12:44 dial 500
19:12:44 ring station 500 cid 0x213
19:12:44 G711A ss:eek:ff ps:20 rn:1/2 192.168.0.185:2048 192.168.2.31:2066
19:12:46 active station 500 cid 0x213
VOIP data from: 192.168.2.31:2066
19:12:55 Jitter:6 6 7 6 8 10 6 6 6 10: Buff:15 WC:29 Avg:10
19:12:55 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: 192.168.2.31:2066
19:13:06 Jitter:6 6 6 6 6 5 6 5 6 6: Buff:15 WC:30 Avg:9
19:13:06 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
VOIP data from: 192.168.2.31:2066
19:13:16 Jitter:6 9 6 7 6 8 12 10 8 8: Buff:14 WC:30 Avg:9
19:13:16 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
___________________________________________________________


But If I were to call from Analog TDM (Site A) to Analog TDM (Site B) then I have one way communication path. The trace like below :-


___________________________________________________________
list trace station 500 Page 1
LIST TRACE
time data
19:09:57 Calling party station 402 cid 0x20e
19:09:57 Calling Number & Name 402 EXT 402
19:09:57 dial 500
19:09:57 ring station 500 cid 0x20e
19:09:57 G711A ss:eek:ff ps:20 rn:1/2 192.168.0.34:2116 192.168.2.31:2062
19:09:57 xoip: fax:Relay modem:eek:ff tty:US 192.168.0.34:2116 (igc)
19:09:57 xoip: fax:eek:ff modem:eek:ff tty:eek:ff 192.168.2.31:2062 (igc)
19:09:57 G711A ss:eek:ff ps:20 rn:1/2 192.168.0.34:2116 192.168.2.31:2062
19:10:03 active station 500 cid 0x20e
VOIP data from: 192.168.0.34:2116
19:10:08 Jitter:0 0 0 0 0 0 0 0 0 0: Buff:8 WC:2 Avg:1
19:10:08 Pkloss:0 0 0 0 0 0 0 0 0 0: Oofo:0 WC:0 Avg:0
19:10:08 idle station 500 cid 0x20e
___________________________________________________________

What does xoip means? Any command or setting needs to be done at G350? Does it means voip got problem?

S8300-G700 IP Address 192.168.0.30
G350 IP address 192.168.2.31 (Gateway is up and registered)

Please help. Feel free to ask for clarification. Thank you
 
HI Shandy
Seems there is something wrong with the network routing between 192.168.0.34 & 192.168.2.31, pls check the ip route setting in G350 & G700, and you may get help from your network team if no erros about ip route were found.
 
Hi Aramhowe,

Thanks for the reply. Do you have the configuration notes for G350 ip route config that I can verify with my current settings?
 
A example for your reference

MG-002-2(configure)# show ip route voip v0

DESTINATION MASK GATEWAY
--------------- --------------- ---------------
0.0.0.0 0.0.0.0 192.168.162.1
192.168.162.0 255.255.255.0 192.168.162.27
 
Dear AramHowe, Thanks a lot for your help. The system is up and running.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top