Running Seperate Companies Behind One Definity G3Si

[imalc3142]

Hi All,

My company this is using a Definity 3Gsi. We have 3 PRI’s coming into the PBX in 2 trunk groups.

We would have a 2nd company that is currently sharing the PBX. We would like separate the 2nd company so that they have their own dedicated lines (no more than 12 lines). The goal is to have separate billing, separate DID’s and separate outgoing caller id. Also the DID’s are already assigned and most cannot changed and the DID’s are not contiguous. We also have some internal extensions assigned for the 2nd company (again non-contiguous but these can be changed as long as the route to the 2nd companies outgoing lines).

Is this possible? If so how?

Thanks,

 

[ilikeavaya]

is tenant partitioning turned on?

 

[imalc3142]

Tenant partitioning is turned off

 

[ilikeavaya]

well, then you will have to seperate them by COR & use partiton routing for thier outgoing calls.

 

[mikeydidit]

A small CAS may be worth you wild. This would let you bill by extension and not by company.

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594