Running Com manager r. 11 can I install the lastest 46xx firmware?

[acuratsx]

How do I find out if com manager r. 11 is compatible with the latest 46xx firmware?

 

[acuratsx]

I'm sorry I meant I'm running release 11 on a G3rsi VOIP.

 

[Mitch672]

acuratsx, it will most likely work, however, not all of the new fancy fearures will work, as some of them require CM 2.2, or even CM 4.0 or greater. It will work as well as what you are using now most likely.

https://support.avaya.com/japple/cs...tID=107755&temp.bucketID=108025&PAGE=Document

and i quote:

"To get the full H.323 functionality of all of the releases in the 46xx Release 042108 package, you need Communication Manager Release 4.0, but you can install certain releases on telephones supported by Communication Manager 2.1 or later. The functionality you will not have prior to Communication Manager Release 2.1 is 4610SW support for display of multi-byte characters, 4610SW native support, certain Call Log enhancements.

To get the full H.323 functionality of the 4601+, 4602SW+, 4610SW, 4620, 4620SW, 4621SW and 4622SW Release 042108, if the Avaya circuit pack TN799C (CLAN board) is used, it must be at vintage 3, or greater. "

mitch


AVAYA Certified Specialist