RetrogradePAK
IS-IT--Management
our Citrix 4.5 is setup in a way that all applications are run in 256 color modes. If it possible to run a particular application in Full True Color.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Running a particular application in True Color
- Thread starter RetrogradePAK
- Start date
- Status
gogadrum,
You can go to the published application and change the color in the properties of the application.
This will change the global setting for that application.
So just launch the CMC and go to the published app-right click and go to properties. You can go into the display settings and change the color in there.
Hope that helps.
You can go to the published application and change the color in the properties of the application.
This will change the global setting for that application.
So just launch the CMC and go to the published app-right click and go to properties. You can go into the display settings and change the color in there.
Hope that helps.
Just be aware that if you change the settings on one app, this can have a detrimental affect on your other apps.
from citrix:
"published application definitions are of a different resolution type, encryption level or color depth, a new session launches and Session Sharing does not occur
from citrix:
"published application definitions are of a different resolution type, encryption level or color depth, a new session launches and Session Sharing does not occur
- Status
Similar threads
- Question
- Locked
- Question