vasquezwilmer
Technical User
Dear all,
I want to know how can I set my trnks meridian 11c in sequence way. I set its trunks member using LD14.
The analog trunk has 7 member with route 81. Each channel has its respectly member as follow:
trunk 19 ch 0 ---> route 81 member 1
trunk 19 ch 1 ---> route 81 member 2
trunk 19 ch 2 ---> route 81 member 3
trunk 19 ch 3 ---> route 81 member 4
trunk 19 ch 4 ---> route 81 member 5
trunk 19 ch 5 ---> route 81 member 6
trunk 19 ch 6 ---> route 81 member 7
The problem is that in this way, trunk 19 ch 4, trunk 19 ch 5 and so on, will be accesed only when the other trunks will be busy at the same time.
Is there any idea for set the access trunk ether in sequence way or random.?
Your promp reply will be greatly apreciated
Wilmer
I want to know how can I set my trnks meridian 11c in sequence way. I set its trunks member using LD14.
The analog trunk has 7 member with route 81. Each channel has its respectly member as follow:
trunk 19 ch 0 ---> route 81 member 1
trunk 19 ch 1 ---> route 81 member 2
trunk 19 ch 2 ---> route 81 member 3
trunk 19 ch 3 ---> route 81 member 4
trunk 19 ch 4 ---> route 81 member 5
trunk 19 ch 5 ---> route 81 member 6
trunk 19 ch 6 ---> route 81 member 7
The problem is that in this way, trunk 19 ch 4, trunk 19 ch 5 and so on, will be accesed only when the other trunks will be busy at the same time.
Is there any idea for set the access trunk ether in sequence way or random.?
Your promp reply will be greatly apreciated
Wilmer