Rpc over HTTP

[andytheautomator]

Hello all,

I am trying to configure Rpc over http for Outlook 2003 and Exch 2003. When I run rpcdump on the Exchange server it tells me that ncacn_http isn't working but I have everything setup the way Microsoft says. Any help would be great.

Thanks,

here is the log file...

ncacn_http(Connection-oriented TCP/IP using Microsoft Internet Information Serve
r as HTTP proxy.)
10.0.0.216[1028] [12345678-1234-abcd-ef00-0123456789ab] IPSec Policy agent end
point :NO
10.0.0.216[6004] [12345678-1234-abcd-ef00-01234567cffb] :NO
10.0.0.216[1028] [12345678-1234-abcd-ef00-01234567cffb] :NO
10.0.0.216[6004] [12345778-1234-abcd-ef00-0123456789ab] :NO
10.0.0.216[1028] [12345778-1234-abcd-ef00-0123456789ab] :NO
10.0.0.216[6004] [f5cc5a18-4264-101a-8c59-08002b2f8426] MS NT Directory NSP In
terface :NO
10.0.0.216[1028] [f5cc5a18-4264-101a-8c59-08002b2f8426] MS NT Directory NSP In
terface :NO
10.0.0.216[6004] [e3514235-4b06-11d1-ab04-00c04fc2dcd2] MS NT Directory DRS In
terface :NO
10.0.0.216[1028] [e3514235-4b06-11d1-ab04-00c04fc2dcd2] MS NT Directory DRS In
terface :NO
10.0.0.216[6002] [1544f5e0-613c-11d1-93df-00c04fd7bd09] MS Exchange Directory
RFR Interface :NO
10.0.0.216[6002] [f930c514-1215-11d3-99a5-00a0c9b61b04] MS Exchange System Att
endant Cluster Interface :NO
10.0.0.216[6002] [83d72bf0-0d89-11ce-b13f-00aa003bac6c] MS Exchange System Att
endant Private Interface :NO
10.0.0.216[6002] [469d6ec0-0d87-11ce-b13f-00aa003bac6c] MS Exchange System Att
endant Public Interface :NO
10.0.0.216[6001] [a4f1db00-ca47-1067-b31f-00dd010662da] Exchange 2003 Server S
TORE EMSMDB Interface :NO
10.0.0.216[6001] [99e64010-b032-11d0-97a4-00c04fd6551d] Exchange Server STORE
ADMIN Interface :NO
10.0.0.216[6001] [99e64010-b032-11d0-97a4-00c04fd6551d] Exchange Server STORE
ADMIN Interface :NO
10.0.0.216[6001] [89742ace-a9ed-11cf-9c0c-08002be7ae86] Exchange Server STORE
ADMIN Interface :NO
10.0.0.216[6001] [a4f1db00-ca47-1067-b31e-00dd010662da] Exchange Server STORE
ADMIN Interface :NO
10.0.0.216[6004] [12345678-1234-abcd-ef00-0123456789ab] IPSec Policy agent end
point :NO

 

[corinthian]

You are right on... you do have everything setup correctly. The anwser is to verify that the service are listening on the correct ports (6001, 6002, 6004).

The MS article does clarify that well.

I ran around this issue for days (troubleshooting something that was working fine.) My problem ended up being the firewall (CISCO PIX).

Hope this helps someone.

Corin