routing

[rthomas5]

I have a 2000 server set up running isa server 2000.
I want to put 1 nic on the internal network and the 2nd nic
on the dsl. This way, you have to go through the first nic to hit the dsl. My routing isnt working. any suggestions
or web sites I can visit would be appreciated.
Thanks
Have you rebooted yet?

 

[MattWray]

Do you have NAT configured? Also you will need a static route for 0.0.0.0 with mask 0.0.0.0 out your External interface.
NAT

http://support.microsoft.com/default.aspx?scid=kb;en-us;Q310357&sd=tech

RRAS

http://support.microsoft.com/default.aspx?scid=KB;en-us;299810&

Those links aren't that good, but maybe they'll help... Thanks,

Matt Wray

http://www.netcomtec.com

http://www.total-tec.com

 

[rthomas5]

OK, Iv configured nat according to the steps from the website. Now the static route is confusing me a bit.
I go into static routes in routing and remote access server and click on new static route. Im not sure exactly how to fill this part out. Would I select the internal nic and put the ip and mask as 0.0.0.0 and then put the gateway as the external nic?
Thanks for the help Have you rebooted yet?

 

[MattWray]

Destination: 0.0.0.0, Network Mask: 0.0.0.0, Gateway: External Interface, Interface: Internal Interface, Metric:1
Hope that helps! Thanks,

Matt Wray

http://www.netcomtec.com

http://www.total-tec.com

 

[rthomas5]

Ill try it. Thanks alot for the help! Have you rebooted yet?