Routing to multiple IPs

[warwar2]

I'm a neophite when it comes to communications so be gentle if this is a dumb question...
I need to transmit UDP packets to multiple devices on separate static IPs. These devices do not support multicasting. I was hoping that NAT would support this but the documentation I have found so far only mentions one to one address translation. Is this something a router can do or is there another off the shelf solution for this?
Thanks.

 

[rudeboy]

You can set up static PAT. This will set up static translations on a port level.

This is one example

http://www.cisco.com/en/US/tech/tk175/tk15/technologies_configuration_example09186a0080093e51.shtml