Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ROUTING OFF BASE

Status
Not open for further replies.

mach1tec

Programmer
Nov 4, 2006
103
US
I can re-route a number w/Vector to a on base 5 digit number, but cannot re-reoute to an 10 digit off base number.
I trace the vector and it shows it being routed, but the call goes idle....Any ideas.
 

VDN COR needs to allow calls out to number, check that first.

- Stinney

Quoting only proves you know how to cut and paste.
 
Yeah , I checked that, even "calling party restriction" on COR field.....Nice try though !
 

Obviously dialing 9 before 10 digit number, right?

You can dial number from phone with same COR?

- Stinney

Quoting only proves you know how to cut and paste.
 
Stinney> It worked !
I changed out VDN COR TO A 7, didnt work. Then I changed it to a 1, viola. It worked.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top