Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

routing issue 1

Status
Not open for further replies.

supportahm1980

Technical User
May 30, 2006
208
US
We have had an issue for sometime and I am fed up with it.

The issue is when someone connects via vpn client they can only access network resources and not the internet.

I have did a ipconfig /all and checked all the settings. It seems that the default gateway is the same as the IP address.
Code:
Ethernet adapter SonicWALL Virtual Adapter:
        Connection-specific DNS Suffix  . : cellzdirect.local
        Description . . . . . . . . . . . : SonicWALL VPN Adapter
        Physical Address. . . . . . . . . : 00-60-73-E5-4B-53
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.40.104
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.40.104
        DHCP Server . . . . . . . . . . . : 192.168.40.250
        DNS Servers . . . . . . . . . . . : 192.168.70.10
                                            
                                            
        Primary WINS Server . . . . . . . : 192.168.70.10
          Lease Obtained. . . . . . . . . . : Wednesday, January 24, 2007 4:39:54
PM
        Lease Expires . . . . . . . . . . : Wednesday, January 24, 2007 5:09:54
PM


When I do a tracert for yahoo.com it does not go anywhere.
Code:
C:\Documents and Settings\>tracert [URL unfurl="true"]www.yahoo.com[/URL]

Tracing route to [URL unfurl="true"]www.yahoo-ht2.akadns.net[/URL] [209.131.36.158]
over a maximum of 30 hops:

  1     *        *        *     Request timed out.
  2     *        *        *     Request timed out.
I also notice when I do a router print the 0.0.0.0 destination is my address. The 192.168.1.1 is the ip my wireless router is giving out.
Code:
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 18 8b ae b8 19 ...... Broadcom NetXtreme 57xx Gigabit Controller - Pa
ket Scheduler Miniport
0x3 ...00 18 de b3 47 91 ...... Intel(R) PRO/Wireless 3945ABG Network Connectio
 - Packet Scheduler Miniport
0x4 ...00 60 73 e5 4b 53 ...... SonicWALL VPN Adapter - Packet Scheduler Minipo
t
===========================================================================
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0      192.168.1.1   192.168.1.102       26
          0.0.0.0          0.0.0.0   192.168.40.104  192.168.40.104       1
        127.0.0.0        255.0.0.0        127.0.0.1       127.0.0.1       1

I was wondering if anyone could make any sense of this. I am very confused.
We are using a sonicwall device 3060. Thanks for any insight as to where I should look.
 
Thanks jfwedder I looked all over and did not find that site.I will report back this weekend after I test. Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top