Routing issue between interfaces

[Atlantauk]

Can anyone shed light on why any device on the 10.20.60.x network on this router cannot ping 65.124.193.83 or get traffic out of the default gateway at 65.124.193.81 in the config below?

I can get voice traffic that comes in over the T1 1/1 to leave via the 65.124.193.81 but no traffic such as http from the 10.20.60.x nework.

Thanks. The config is......



tampa2600>en
Password:
Password:
tampa2600#show config
Using 2028 out of 29688 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname tampa2600
!
boot-start-marker
boot-end-marker
!
enable password xxxxxx
!
no network-clock-participate slot 1
no network-clock-participate wic 0
voice-card 1
!
no aaa new-model
ip subnet-zero
ip cef
!
!

controller T1 1/0
framing sf
linecode ami
!
controller T1 1/1
framing sf
linecode b8zs
ds0-group 1 timeslots 1-24 type e&m-wink-start
!
Rule 1 ^1 2056#1
Rule 2 ^011 2056#011
!
!
!
!
interface FastEthernet0/0
ip address 65.124.193.83 255.255.255.240
no ip route-cache cef
no ip route-cache
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 10.20.60.1 255.255.255.0
duplex auto
speed auto
!
no ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 65.124.193.81
!
!
voice-port 1/1:1
!
!
!
!
!
dial-peer voice 10 pots
incoming called-number ..
destination-pattern ..T
port 1/1:1
!
dial-peer voice 100 voip
destination-pattern 1T
translate-outgoing called 1
session target ipv4:12.128.107.253
!
dial-peer voice 3000 voip
description Inbound
incoming called-number ..
!
alias exec hi show call history voice brief
alias exec acv sh call active voice brief | incl activ
alias exec zv show call active voice brief | incl Orig
alias exec ct configure terminal
alias exec hist show cancl Tele
alias exec acmed show call active voice | inc MediaIP
alias exec himed show call hist voice | inc MediaIP
alias exec acf show call active fax brief
alias exec hizv show call history voice brief | incl Orig
alias exec acip show call active voice brief | incl IP
alias exec calls show voice call summ
alias exec phno show call active voice brief | incl Origin
alias exec dur show call active voice brief | incl dur
alias exec rtp show voip rtp connections
alias exec accion show call active voice compact
alias exec ac show call active voice brief
!
line con 0
line aux 0
line vty 0 4
password xxxxxxx
login
!
!
end

tampa2600#

 

[rudeboy]

You don't have any NAT rules set up. Without setting up NAT, your private network won't be able to surf the web as 10.0.0.0 is a non-routable subnet on the internet. However, if both interfaces are up, I am not sure why you can't ping your FastEthernet0/0 IP from your LAN.