Routing How to?

[IPAX]

Hi,
i have 3 cisco 3845 routers. my R1 is connected to internet and i'm using 192.168.0.0/20 for my lan. R2 is connected to R1 and R3 and using 172.16.0.0/20. R3 is connected to R1 and R2 using 10.0.0.0/20.

If a client directly connected to R1, is it possible to use IPs 172.16.0.0/20 or 10.0.0.0/20 to get internet? That client can use internet using 192.168.0.0/20.

I'm using OSPF and i'm not getting internet using IPs other than that router's IPs.

If it is possible then how?

 

[Alterac]

Post a Config of R1 please.

Im assuming your Natting on R1? Are you nating only 192.x or all 3 ranges?



----------------------------------
Bill

 

[IPAX]

All 3 ranges Alterac

 

[Alterac]

You need to post the config of all 3 routers for us to help you out... Take out the passwords first.

----------------------------------
Bill