Routing Fax from Fax Server through 2nd PRI Card 4

[ega218]

I have tried several configurations and can not find one that will allow for digits to be sent from a Diva Fax Server PRI/T1 card through a 2nd PRI/T1 card on IPO out through 1st PRI/T1 card on IPO.

I have setup Incoming routes for each users four digit DID numbers, routing all faxes to the Diva Fax Server via the PRI cards. This is working fine. However, I can not successfully send faxes from the Diva Card. I have tried all shortcodes possible.

The last thing I did was to setup an incoming route for the 2nd PRi/T1 card which is connected to the Diva Fax.

Does any one have a any ideas. Thank you.

 

[Morrack]

Hmmmm... this is really strange - I see no difference at all in your ISDN layer 3 setup packets. I have no idea why the PSTN is rejecting the call from the faxserver.

If you find 4 channels isn't enough on your faxserver (dare I say it?) you might have success going T1 to the IPO, then out on the PRI since the diva seems able to dial on T1 properly.... *grin*

Peter

PS Yes yes I love this stuff (translation I'm a sucker for punishment)