Router RIP Problems

[bgregorcy]

Hello,

I am trying to set up a lab and I am running into problems. I am trying to set up three 2500 series routers back to back to back. Here's my config:

Router1:

e0 = 172.16.10.2 255.255.255.0
s0 = 172.16.20.1 255.255.255.0

Router2:

e0 = 172.16.30.1 255.255.255.0
s0 = 172.16.20.2 255.255.255.0
s1 = 172.16.40.1 255.255.255.0

Router3:

e0 = 172.16.50.1 255.255.255.0
s0 = 172.16.40.2 255.255.255.0


Also I turned off: no ip classless and no ip split-horizon.

When I do a sh ip route all I get is:
172.16.0.0/24 is subnetted, 1 subnets
C 172.16.20.0 is directly connected, Serial0

I can't ping anything?

I pretty newb at this so it is probably something I overlooked. If anybody has any ideas it would be greatly appreciated.

b

 

[bgregorcy]

Thanks for the help all,


pmesjar you were right. I had the serial cables connected in the the wrong ports. I now can get RIP and EIGRP to work.

Thanks again,

b