Router connected to DSL

[ochoops]

At home I have DSL. I'm trying to setup a 1700 to use the DSL account and have a couple PC's use it off a switch.

The E0 wic is set to the IP address assigned by the ISP and FA0 is set to the subnet (10.x). I've setup static routes, gateway of last resort, ip domain-lookup and name-server.

I am able to ping the internet from the routers E0 wic (i.e.,

http://www.yahoo.com

or 4.2.2.1, etc) but not from the FA0 wic (10.x subnet).

I've enabled RIP v2 and entered both networks (192.168.1.0 & 10.0.0.0).

What am I forgetting?

Thanks,
Tom

 

[gtmoore]

Tom,

Are you using NAT? You will not be able to ping from a network that is not routable on the Internet without NAT or PAT.

Greg