Router 1605 R, help with flash upgrading

[1100466]

hi everyone,

i've got a problem with the upgrading of the flash in a 1605R router. I'm trying to upgrade it from a tftp-server. at first, i thought that it worked, but now i don't know how to get out of the Router(boot)#.

if somebody can help me, please do...

tnxs,

ps.: i hope that you understand my problem, 'cause my English isn't great...

 

[hsh2hsh]

>enable
after you provide the correct password,the prompt "#"will appear.

 

[1100466]

Yes i understand that, but the boot won't disappear. and when i do:
#show flash, it says that that has been no flash in the router.

 

[jgercken]

The router can't find the ios binary specified in the config so it's booting to RxBoot mode (image from boot ROM). In this platform the flash memory is actually a flash card. You access this as slot0:.

dir slot0:
copy tftp slot0:

When you have the image there you can optionally add a boot command to tell the router where it needs to look.

boot system flash slot0:c1600-sy-l.122-1a.bin

If you don't the router will load the 1st image it sees.
Confirm your boot register is 0x2102

http://www.cisco.com/warp/public/130/sw_upgrade_proc_flash.shtml

-Jeff

----------------------------------------
Wasabi Pop Tarts! Write Kellogs today!

 

[1100466]

i've already found the problem.....and it's pretty silly..)))

i didn't have the right ios file (.bin)
it was 0 kb and it had to be more than 3000 kb.

that was the one thing i wasn't looking for....



but thanks you all for trying to help me..

xxx
morgana