Routeing to a trunk group

[mcdtech]

How do i route a 4 digit number to a trunk group via an UDP/AAR?

 

[letman2]

in the ch uniform dial plan your matching pattern is your 4 digit number, len = 4, del=0, insert = I usually insert 3 digits, net = aar and that routes the call to the aar analysis tables where the dial string would be the 3 digits I added. The min max = 7 choose a route pattern and the call type would be aar The 3 digits that I added in the uniform dial plan are stripped off on the route pattern form. On the route pattern form I select a trunk group.

 

[mcdtech]

Thanks I am trying to set up some 4 digit ext. to route to another switch in the same building. They also want to be able to call my switch with 4 digit dialing. Does that make since?

 

[letman2]

yes what kind of trunk are you using

 

[mcdtech]

I am going to send it to them via a TN464 circuit pack.