Route initiation surprise ... !!

[alradan1987]

Hello guys,

I hope you all doing well. I am trying to initiate this Route 8 for Ericsson GT36 GSM gateway to be used later in LCR, the bro ROCAI is going fine but the other bro RODDI said no ... any help my Pro Bros ..

Kind regards,

<ROCAI:ROU=8,SEL=0110000000000010,TRM=4,SERV=2100000000,NODG=0,DIST=30,DISL=128,TRAF=01151502,SIG=500000000000,BCAP=001100;
EXECUTED
<RODDIEST=81,ROU=8,ADC=00050000000002500000000000,TRC=0,SRT=3,NUMACK=0;
COMMAND IN WRONG ORDER
NOT ACCEPTED

 

[himdp]

You need RODAI first.

 

[alradan1987]

Thanks himdp,

really appreciate your help, just a tiny question, Can t different routes have same Dest code?

 

[alradan1987]

My RODAI is not going ..

<RODAI:ROU=8,TYPE=TL11,VARC=00001110,VARI=00005488,VARO=20000815,FILTER=NO;
NOT ACCEPTED
VARC
FORMAT ERROR

 

[himdp]

Different routes can have the same dest. You would normally assign different CHO values.

Where did you get the data for RODAI? It is not a typical TL11 PSTN route so I assume that the gateway you are connecting to has an unusual interface (24v for example).

 

[alradan1987]

No actually it is normal PSTN twisted pair main telephone line.

 

[himdp]

You didn't say where you gat the values for the parameters. I would typically configure a normal short line pstn route with-
RODAI:ROU=8,TYPE=TL11,VARC=00000012,VARI=00000108,VARO=00008815;