Route DID to Fax Server

[volaris]

I have a Merlin Legend Release 7.0 with 2 100 DS1 modules. The first is connected to our incoming PRI and the second is connected to a Digital Fax card on a Fax server. How do I route a DID that comes in on the PRI to make it go out the second DS1 to the Fax server.

 

[merlinman]

How is the 2nd DS1 module set up?

(E&M, PRI - WHAT)

There certainly ways to do this.

Also, how many ports on your fax server?

 

[volaris]

The second DS1 has just been installed and is not really set up yet. The Digital Fax card has one RJ-45 port and is an 8-port fax card but we are only licensed for 4. The card can be set up to accept any type of setup that the DS1 card needs it to be. The second DS1 card will only be used to route calls to the fax server. What is the best setup for the DS1 in this situation and how would I route the calls? Any help would be appreciated.