route 31 - private lines

[coniglio]

I have an option 61c (recently upgraded from 22 to 25.40). can private lines be programmed anywhere else besides route 31? i want to replace all my private lines with DIDs but don't want to miss any of them. Do I need to look anywhere else? thanks for your help.

 

[one234]

Print the TN's on your COT/DID/whatever card and you will see a prompt RTMB this show's the route and the member.

If you do not know which card they are on you could do a LTM (List Trunk Members) in ovl21 for route 31, and that should get you started.

If you know the route's (0 to 511 are possible) you can convert them to DID.

Marc D.

No trees were killed in the sending of this message. However a large number of electrons were terribly inconvenienced.

 

[coniglio]

I have already done an LTM on route 31. That's what I'm asking. Is this the only route that private lines can be programmed on? and what do you mean by convert them to DIDs?

 

[one234]

Route 31 isn't the only route which can be programmed as Private line. You are able to programm 512 route's in your switch. Any of these route's can be whatever you program it to be...

What you also can do, is print all the programmed routes and check the priv option and if they got any members... (Hit return at the route prompt)

Marc D.

No trees were killed in the sending of this message. However a large number of electrons were terribly inconvenienced.

 

[BangkokMike]

Look at your trunk programming. If it has a PRDN, then it has been set up as a private route. Also in LD 16 look at your routes to see what has been programmed to be Private lines.

 

[masamsi]

Hi, you can create another private RDB other than RDB 31. I create my private line using the RDB 10 and it works fine. thanks