Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rough Transition - International dialing woes

Status
Not open for further replies.
getthehammer

getthehammer

Technical User
Aug 1, 2007
1
US
We have recently changed carriers and have encountered problems. We cannot dial international numbers through our t-1 circuits despite the fact that 800, long distance, and local numbers work just fine. The switch acts like it never leaves ARS and ends with the message "connection failure". I suspect the carrier's lines are the culprit but they swear up down that it is our switch and that they have identical models that work just fine. I am tapped out...any insight on what I might be dealing with here?
 
Sort by date Sort by votes
Changed the RSM (restriction mode)to 0.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

SNAFU001
  • Locked
  • Question
F9600 - 10 Digit Dialing
Replies
2
Views
53
SNAFU001
SNAFU001

Part and Inventory Search

Sponsor

Back
Top