Room Move

[Canmi]

Hi

Someone know if is possible to move one room in a cs1000 when I used Hospitallity?

Check In: se cp 124 "name" ch in
Check out: se cp 124 ch ou
Move: ?

Thanks to all

 

[Reusser]

what are you meaning by Move? Normally we think of move as moving a DN from one TN to another.

 

[Canmi]

When the switch is installed in a Hotel, you can configure one TTY port to work with an interface of some hotel managment software (Brilliant, Opera...). If someone do a check in or check out, or wake up call, or change of room status, the interface send the information to the PBX. The check in is a frame in the next format:

SE CP 312 " Joseph " CH IN LA 1

When 312 is a room number, Joseph the name of client, CH IN the order and LA 1 the language.

Some hotel softwares, have the posibility to move a client from one room to another, because the first room is not in perfect condition.

In this case, I don´t know if the CS1000 or Meridian have this option...

Thank you

 

[DocVic]

Normally, you would have a GAC terminal next to the switch or at the operators console to make these changes. Your primary controller is the Hotel/Motel Management System to check out and check back in the user. Talk to that vendor for more information.

DocVic
Dedicated to Nortel Products till the end.
Need help? Call Me Now!

 

[Reusser]

there is no Move funtion in PBX - if the PMS has a move funtion it would have to send to the PBX a check out for the one room and check in to another

 

[Canmi]

I read the background documentand but I haven´t see anything about this option. I will tell with the interface software vendor for view the option...

Thanks every people